This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homelabsales by /u/neko-noire on 2025-06-30 04:24:09+00:00.

Timestamp: https://imgur.com/a/r3jI6Ky

Hello! I have for sale 20x custom Lenovo Tiny risers for the Lenovo M920q, M920x, M720Q, P330 series Tiny PCs.

This riser is custom designed by a-little-wifi, and details for the riser can be found at his/her github at https://github.com/a-little-wifi/Tinyriser. All credits goes to the deisgner.

It supports PCIe x16 slot just like the original, but adds an extra M.2 PCIe x4 lane for an additional SSD. This riser is plug and play, and does not require any mofification on the Tiny itself.

2260 or smaller SSDs are recommended. 2280 length SSDs can work, but will be at an angle due to the screwpost on the Tiny. This screwpost can be solder off if you have a hot air station. Once desoldered, you can fit a wide varity of m.2 cards in the slot.

I follow through the github guide, and ordered the parts from JLPCB, LCSC, and Aliexpress. I went with the minimum amount of parts required to make the riser work, so there are no activity LED on this riser.

All risers has been throughly tested to work. Testing was done on a M720q. The PCIe slot are tested with a 3050 and running through Furmark benchmark twice. The M.2 slot are tested by running Crystal Disk Mark on two identical NVMe SSDs I have, with 1 SSD in the factory NVMe slot on the bottom, 1 SSD in the riser slot, and compared the results.

Pricing are as follow:

1x - $30 shipping included.

2x - $55 shipping included.

3x or more - $25 each, shipping included.

19x SOLD

1x Invoiced

ALL Risers are sold or are pending at this time.

Local is NYC 10314. Open to offers. Comment, then PM.