This is an automated archive made by the Lemmit Bot.

The original was posted on /r/homeassistant by /u/6StringMonk on 2023-07-04 20:39:38+00:00.

I am getting timeout error when updating the firmware. Let me know how to get past this error.

Model : ZBDongle-P

meuser@mymacs-mbp cc2538-bsl % sudo python3 cc2538-bsl.py -ewv -p /dev/tty.usbserial-1420 --bootloader-sonoff-usb ./CC1352P2_CC2652P_launchpad_coordinator_20221226.hex sonoff Opening port /dev/tty.usbserial-1420, baud 500000 Reading data from ./CC1352P2_CC2652P_launchpad_coordinator_20221226.hex Your firmware looks like an Intel Hex file Connecting to target… CC1350 PG2.0 (7x7mm): 352KB Flash, 20KB SRAM, CCFG.BL_CONFIG at 0x00057FD8 Primary IEEE Address: 00:12:4B:00:26:B8:49:4D Performing mass erase Erasing all main bank flash sectors Erase done Writing 360448 bytes starting at address 0x00000000 ERROR: Timeout waiting for ACK/NACK after ‘Get Status (0x23)’